Bài giảng Thực hành CCNA 3 (Number 1)

BỘ GIÁO DỤC VÀ ĐÀO TẠO TRƯỜNG CAO ĐẲNG CNTT TP. HCM ĐỀ THI SKILL CCNA 3 MÔN HỌC THỰC HÀNH CCNA 3 Mã môn: Dùng cho các ngành: Mạng máy tính Bộ môn phụ trách: Mạng máy tính CCNA 3 - Skills-Based Assessment Page 1 of 2 CCNA 3 Skills-Based Assessment Number 1 Student Name: Date/Start time: Score: Notes to Students Review the following points before the start of the lab exam: • The exam time is 120 minutes. 100 minutes to configure all the requirements. The remaining 20 minutes is for configuration check and oral questions.. Points Summary: Section 1: Cabling Section 2: Configuration 203.162.4.16/30 Section 1: Cabling (20 minutes – 20 points) Using the diagram, connect all the associated devices. Note: The wireless router WRT300N connect to the Switch1 using port Ethernet and connect to port of VLAN 10 on the Switch1 Section 2: Configuration (80 minutes -- 80 points) Apply a basic configuration to the router, switchs and wireless router WRT300N. This configuration should include all the normal configuration items as following requirements: 1. Configure the hostname. 2. Disable DNS lookup. 3. Configure an EXEC mode password. 4. Configure a message-of-the-day banner. CCNA 3 - Skills-Based Assessment Page 2 of 2 CCNA 3 - Skills-Based Assessment Page 3 of 2 5. Configure a password for console connections. 6. Configure a password for VTY connections. 7. Synchronize unsolicited messages and debug output with solicited output and prompts for the console and virtual terminal lines. 8. Configure switchs with ip addess and default gateway on the management VLAN. 9. Configure VTP, VLANs, STP and ports on the switchs with the information list below. 10. Configure WRT300N with SSID: Staffonly; configure security use WPA2 with pre- share key: cisco 11. Configure port security on the Switch1 for 5 PCs or Laptop on the Wireless LAN can access LAN. 12. Configure the routers for network operation, all PCs can access to others and to the Internet. 13. Configure workstation correctly: IP Address / Subnet mask, Default Gateway VTP on the Switches Switch Name VTP Operating Mode VTP Domain VTP Password S1 Server ITC Cisco S2 Client ITC Cisco VLANs on the Switchs VLAN VLAN Name VLAN 99 Management VLAN 10 faculty-staff VLAN 20 Students Port Assignments – Switch 1 Ports Assignment Network Fa0/1 – 0/3 802.1q Trunks (Native VLAN 99) 172.17.99.0 /24 Fa0/4 – 0/17 VLAN 10 – Faculty/Staff 172.17.10.0 /24 Fa0/18 – 0/24 VLAN 20 - Students 172.17.20.0 /24 Port Assignments – Switch 2 Ports Assignment Network Fa0/1 – 0/3 802.1q Trunks (Native VLAN 99) 172.17.99.0 /24 Fa0/4 – 0/17 VLAN 10 – Faculty/Staff 172.17.10.0 /24 Fa0/18 – 0/24 VLAN 20 - Students 172.17.20.0 /24 STP on the Switchs: • Switch1 is Root Bridge of VLAN 10 • Switch0 is Root Bridge of VLAN 20